To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Hitch had lots of deep scratches had to repaint some areas. But a very sturdy and good quality.
Easy to install looks good works like a charm
shipped faster than if i drove there and picked it up myself! great service. and the products themselves exceeded my expectations.
Easy to install. Instructional video on website was great.
Ordered the hitch and received it in just a couple of days, very easy to install.
The hitch itself, was just as advertized, the speed at which it was delivered to my front door, was exceptional. I was told it would be 2 days,...it was half that time. Thanks, BW.
This hitch was very easy to install. My wife and I installed it in about 30 minutes(which includes the time getting out my tools).Ther is no doubt in my mind that she could have installed it by herself.
Great hitch. Install time was (conservatively) 5 minutes. Took longer to get it out of the box! Ordered it one afternoon and it showed up the next day.
Found your product very easy to install. I did have to go out and buy 2 extra mounting bolts. Other then that. Very nice product.
Great product and fast delivery, took 15 min to install on my 2011 Rav4. Customer service made sure I had the right parts before hit purchase.
Great Service, Fast Shipping, took about 10 minutes to install on 2011 RAV4, looks good.
Very pleased with our new trailer hitch. Easy to install.
Excellent product, seems very well made, arrived in great condition and we installed it in 15 minutes! Thank you etrailer!
Easy online ordering. Excellent follow-up throughout the shipping process. Arrived on time. Excellent product. Would not hesitate to order from this comapnay again. Will share my experience with my friends and family.
If the car is half as strong as the hitch it will be great! The hitch is a very good product and I would recommend it to other friends. The only problem I had is with UPS, as they left the package at someone elses house. Those people saw the name on the box and called me right away! I was impressed with your service and was surprised at how fast I had the products!
I received my hitch without a hitch. It came within 3-4 working days and everything I ordered was in the box. Hitch, receiver, and harness all just as I ordered them and ahead of schedule. I am having it installed even as I write this. I will send pictures ASAP.
Perfect fit, on in 20 minutes at my friends garage. You should suggest that the muffler be dropped out of the way for ease of installing the forward bolt on the passenger side. This is my second hitch from etrailers and I always recommend you guys to my friends. Thanks for a truly great product.
Easy to install. The hitch took only 30 minutes by myself and some blocks of wood to hold it up.The wiring kit took much longer due to routing the power cable, though. Patience and planning is key for that part.
Packaged well, Single instruciton sheet, four bolts. couldn't be simpler... except that if you have a RAV4 sport, you'll need to remove the exhaust tip mounting screw (hex button head holding flexible band) as the sport exhaust chamber blocks one of the hitch mounting bolts (not so on the standard RAV4). Other than that, couldn't be simpler. Hitch is sturdy, and once installed, is about level or slightly higher than the level of any other car bottom components.
The service at etrailer is excellent. I ordered two components for my car, a hitch and wiring harness. Etrailer had the most reasonable prices online, plus their website is easy to navigate and link necessary parts together. After ordering my total came above the minimum for free standard shipping. Etrailer upgraded my shipping for free to 3-5 day overnight. It arrived in excellent condition, and I could not be more pleased with my purchasing experience.
Perfect fit and an easy do it yourself installation project on a 2009 RAV4
Recommend using a 12mm x 1.25 tap if bolt holes need threads cleaned out like mine did.
17mm impact socket to take off the tow plate and a 19mm socket to install the hitch, plus a Torque wrench and an impact driver.
Rubber isolation bushing easily comes off to drop the exhaust out of the way, I used bungees to support the exhaust instead of a strap as shown in the video.
I installed by myself simply lifting and bolting one side on at a time starting with the exhaust side laying on my garage floor. Easy peasy!
Super easy install on a 2008 Rav4 Limited... and it WORKS with a 2 bike Kuat rack!!! Rack clears the tire cover when folded and the inside bike mount has room when loaded. If you have a recovery hook on the left rear side, it has to be removed as the hitch uses one of those mounting locations.
Brooke M.
6/16/2025
Glad to hear that you're able to hit the road with bikes, no issue! Install looks great :) What kind of biking do you enjoy?
Very nicely built all the bolts and washers fit perfectly, without the hitch installed.
While trying to mount the hitch, one side (the driver's) was slightly off by a millimeter. It was as if the whole side of the hitch had been bent or welded at an angle.
Currently a tiny bit of dremelling and filing (on the thinner end ) will fix it. The other side is already pressed against the tub for the 3rd row seats/ cargo area.
It look very sturdy. It fit perfectly where it suppose to be. I sold the car but I am buying one for my new car. No problems with it whatsoever.
Brooke M.
5/5/2025
It sounds like it worked well while you had it and that's what counts! Happy to hear it and thanks for sharing the photos, too :)
One bolt hole did not line up but was able to get it on anyway with a little muscle. Looks good and works great. The video was very helpful for ease of installation. We backed up on two planks to give us extra clearance to install the receiver on the ground. Thx
Steve O. 
8/19/2025
Great
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tim
6/2/2025
Great no problems at all